UNISPEED USFL 90/37 EL 6/90

37° 90° Flaring » UNISPEED USFL 90/37 EL 6/90

UNISPEED USFL 90/37 EL 6/90 is the new machine for 37° and 90° orbital flaring of large-diameter hydraulic rigid tubes ends.

The machine, which requires only one tool change to carry out the flaring operations, uses a cold orbital forming process to create a flat and smooth sealing surface at 90° and 37° with a suitable rugosity for the O-Ring seal.
The different possibilities of adjustment and configuration of the USFL 90/37 ES 6/28 allow to obtain any flaring diameter and thickness.

This machines allows to flare tubes from Ø 6 to 90 mm (5 mm thickness), made in stainless steel (AISI 316 TI) and carbon steel (ST 37.4).
The USFL 90/37 EL 6/90 is provided with an electro-mechanical control and an automated tools lubrication system, which acts by means of a dedicated unit.

TECHNICAL DATA:

  • 90° flaring: 1/4'' - 3'' 1/2 x 0.20''
  • 37° flaring: 1/4'' - 3'' 1/2 x 0.20''
  • Materials: AISI 316 TI - ST 37.4
  • Dimensions (LxWxH): 35''x51.4''x51.4''
  • Weight without oil: 1,887 lbs
  • Oil: 44 lt (11 US gal)
  • Motor power: 8.5 HP

Stainless steel different from AISI 316 TI can compromise the quality of the flaring operation and the tools state of conservation.